Replace the Staple Cartridge on the Booklet Maker Finisher HP LaserJet
Replace the Staple Cartridge on the Booklet Maker Finisher (Y1G07A) | HP LaserJet
[embedyt] https://www.youtube.com/watch?v=_p8eexJcDvs[/embedyt]
Learn how to remove and replace the staple cartridge on the booklet maker finisher for the HP LaserJet Managed E72525-E72535, E72425-E72430, and HP Color LaserJet Managed E77422-E77428 series.
More support options for your HP device are available at https://hp.com/support.
Follow these steps to remove and replace the staple cartridge on the booklet maker finisher:
-Open the finisher front door.
-Slide-out the booklet assembly from the finisher until it stops.
-Locate the staple cartridge.
-Using the colored handle, pull away from the assembly, and then pull up to remove the staple cartridge.
-Push in the two blue tabs, and then lift up to open the top of the staple cartridge carriage.
-Using the two tabs on each side of the staple cartridge, lift up to remove the empty staple cartridge from the staple cartridge carriage.
-Do not discard the staple cartridge carriage.
-It must be reused with the new staple cartridge.
-Recycle the empty staple cartridge.
-Insert the new staple cartridge into the staple cartridge carriage.
-Reinstall the staple cartridge carriage into the booklet maker by pressing the colored handle until it snaps into place.
-Slide the booklet assembly into the finisher.
-Close the finisher front door.
Open the finisher front door. Slide-out the booklet assembly from the finisher until it stops. Locate the staple cartridge. Using the colored handle, pull away from the assembly and then pull up to remove the staple cartridge. Push in the two blue tabs and then lift up to open the top of the staple cartridge carriage.
Using the two tabs on each side of the staple cartridge, lift up to remove the empty staple cartridge from the staple cartridge carriage. Do not discard the staple cartridge carriage. It must be reused with the new staple cartridge. Recycle the empty staple cartridge. Insert the new staple cartridge into the staple cartridge carriage.
Reinstall the staple cartridge carriage into the booklet maker by pressing the colored handle until it snaps into place. Slide the booklet assembly into the finisher. Close the finisher front door.
Need help replacing the Staple Cartridge on the Booklet Maker Finisher?
Contact Us at:
- Toll-Free: 800-564-2972
- Phone: (407) 537-7276
- Email: [email protected]
Or contact us on the live chat below.