Pick this if...
- You run a busy architecture, engineering, or construction office doing 1,500-5,000 D-size prints per month.
- You need 4 roll drawers — bond, tracing paper, film, plus a backup — for non-stop production.
- You print mono CAD up to 36 inches wide at 7 or 9 ppm (configurable) on a chassis lighter than the 6050 (570 lb vs 683 lb).
- You want optional on-board scan or a separate Wide Format Scan System running concurrently at 8 ips while printing.
- You're standardized on FreeFlow Accxes across your wide format fleet.