Xerox · Monochrome Multifunction

Xerox 6622

High-volume mono wide format MFP for repro shops and AEC — 22 D/A1 ppm at 600 x 1800 dpi, 36-inch max width, 4 roll drawers, 40-inch color scanner, 15-inch touchscreen.

0 · 0 verified reviews · Read reviews
Print speed
22 ppm mono
Paper capacity
sheets
Duplex
Single-sided (Simplex)
Connectivity
USB · Ethernet
Get a quote Buy supplies Call (888) 574-5120
Free delivery 24-hr quote turnaround Authorized Xerox reseller Lease or buy outright
In stock
Xerox Xerox Wide Format 6622 Solution
Authorized Xerox reseller Free shipping to 50 states 1-year manufacturer warranty Install guidance by phone 30-day return policy
Is this the right printer for you?

Who the Xerox 6622 is actually for

Most printer pages just tell you what a printer does. Here's the honest version: when this machine is the right choice, when it's fine, and when you should look at something else. We sell a lot of these for a reason, but the reason is not "every office."

Best fit

Pick this if...

  • You run a reprographics shop, repro department, or busy AEC firm printing 2,000-6,000 D-size plots per month.
  • You need 4 roll drawers in one machine so operators can switch between bond, vellum, and film without reloading.
  • You scan large-format originals up to 40 inches wide regularly — as-builts, blueprints, posters, maps.
  • You need monochrome wide format output up to 36 inches wide and up to 20 feet long.
  • You already run FreeFlow Accxes workflow and want a higher-volume sibling to a 6604 / 6605.
Works fine

You'll be happy if...

  • You print 6,000-9,000 D-size plots per month — the 6622 will keep up but you'll be feeding rolls and toner regularly.
  • You need scan-to-FTP for archiving — supported, just plan SMB destination paths up front because Accxes config is fiddly.
  • You're consolidating two 6604s into one machine — one 6622 with 4 rolls covers the workload at lower service cost.
Look elsewhere

Skip this if...

  • You need color wide format output — this is mono only. Get an inkjet plotter (HP DesignJet, Canon imagePROGRAF) instead.
  • You print under 1,500 D-size plots a month — at 968 lb and a 37 x 54 inch footprint, you're paying for capacity you won't use.
  • You need modern cloud scan workflows (Google Drive, OneDrive, scan-to-email at scale) — Accxes is mailbox/FTP/SMB; cloud is not native.
  • You don't have a 230V / 16A circuit available — this is not a standard 120V plug-in unit.
  • You need a quiet, office-friendly machine — this lives in a print room with proper ventilation and floor loading.
Full specifications

Every spec, no guessing

The Xerox Wide Format 6622 Solution is a high-volume mono wide format MFP built for reprographics shops, repro departments, and busy AEC firms that print thousands of D-size plots a month. It runs up to 22 D/A1 prints per minute at 600 x 1800 dpi, supports media up to 36 inches wide and 20 feet long, and ships standard with 4 roll drawers — operators can keep bond, vellum, film, and a backup roll loaded at all times. The integrated wide format scanner handles originals up to 40 inches wide and pushes scans to mailbox, FTP, or remote printer over FreeFlow Accxes. The 15-inch color touchscreen runs the same Accxes workflow as the 6604 / 6605, so existing fleets share drivers and operator training. Recommended monthly volume sits around 58,000 sq ft (roughly 6,000 D-size plots). Footprint is 37 x 54 x 39 inches at 968 lb on a 230V circuit, so this is a print-room machine, not a back-office unit. The thing buyers regret: it is mono only — if you have any color rendering, marketing, or signage volume, you will still need a separate inkjet plotter alongside it. We sell a lot of these to construction document shops and university repro departments replacing two slower 6604/6605 units with one 6622.
Get a quote on this model Compare other printers
Print
Print technology Multifunction
Print speed (mono) Up to 22 pages per minute
Print speed (color) Up to pages per minute
Duplex printing Single-sided (Simplex)
First page out < 9.4 inches per second
Copy & Scan
Capability Monochrome Multifunction
Duplex copy / scan Single-sided (Simplex)
Scanner type On-Board Scanner System
Scan destinations network, E-mail, mailbox
Paper
Paper capacity 0 sheets
Paper size
Recommended monthly volume 50000 pages
Max monthly duty cycle
Connectivity
Wired Gigabit Ethernet (10/100/1000)
USB USB for charging, data transfer, and OTG support
Display 15 inches
Physical & power
Form factor Wide-format
Usage class Production
Manufacturer Xerox
Model Xerox Wide Format 6622 Solution
How you can buy this printer

Buy it, lease it, or just reorder supplies

Three ways to get this printer, each priced to match how you actually use it. Most small offices lease because toner and maintenance are bundled. If you know what you need, buy outright. If you already own one, just reorder supplies.

Buy outright
One-time payment · yours to keep
Custom quote
Free delivery · 1-yr warranty
  • Machine is yours the day it arrives
  • 4,500-page starter toner included
  • 1-year Xerox manufacturer warranty
  • Install help by phone or remote session
  • Order your own toner when the starter runs out
Request purchase quote →
Most small offices
Lease & bundle
36- or 60-month term · toner included
Custom lease quote
Flexible terms · tailored to your volume
  • Printer + unlimited toner bundled
  • Maintenance and parts included
  • Upgrade to a bigger machine anytime
  • Typical lease payment is tax-deductible
  • One predictable monthly bill instead of surprise toner orders
Request lease quote →
Supplies only
Already own one? Just reorder.
Request pricing
Genuine Brother TN830 / TN830XL
  • Genuine Brother TN830 toner (standard yield, ~1,200 pages)
  • Genuine Brother TN830XL toner (high yield, ~4,500 pages)
  • Genuine Brother DR810 drum unit when it's time
  • Free shipping on qualifying orders
  • Auto-reorder option so you never run out mid-job
Order supplies →

Final lease rate depends on term length, credit profile, and bundled supplies. Outright purchase and supplies pricing varies with bundled warranty, install packages, and order volume. Request a quote for exact pricing.

Included with every order

What ships with the Xerox 6622

The printer itself

Xerox 6622 in original Xerox packaging. Wide-format form factor, roughly 54 W x 37 H x 39 D inches

Starter toner

Includes a high-capacity starter supply, giving you about 3 to 6 months of use before you have to think about your next order.

Setup documentation

Xerox quick-start card, power cord, USB cable (use Wi-Fi or Ethernet for multi-user), and a link to driver downloads.

Setup call (if you want it)

Book a 20-minute setup call with our team. We'll walk through network config, driver install, and first print. No extra cost, no sales pitch.

Supplies & consumables

Toner, yields, and what to actually reorder

The #1 question we get on this printer is "which toner do I buy?" Short answer: you have two cartridge options and a drum. Standard yield TN830 covers roughly 1,200 pages. High yield TN830XL covers roughly 4,500 pages and is the better value for most offices. Pick XL unless you print very little.

The drum unit (DR810) is separate and usually lasts 15,000 to 30,000 pages before it needs replacing. At a typical small office volume, expect to change it once every 2 to 4 years.

If you lease this printer through us, toner and drum are included. You never pay for supplies separately. That's usually the better deal once you add up real costs over 3 years.

TN830

Standard-yield toner

About 1,200 pages · fits all L2700 / L2750 / L2759 series

Quote
each
TN830XL

High-yield toner BEST VALUE

About 4,500 pages · recommended for most offices

Quote
each
DR810

Drum unit

15,000–30,000 pages · replace every 2–4 years · separate from toner

Quote
each
Request bulk supplies pricing →
0.0
★★★★★
Based on 0 verified customer reviews

Verified means the customer bought this exact model from us. We don't publish paid or incentivized reviews.

What customers actually say

The 5-star consensus: "it just works"

Small sample size, high signal. The 0 verified reviewers picked this model to replace older inkjets or aging Xerox machines. Common threads in the feedback:

Five reviews is a small sample. Want to see hundreds of reviews across our whole catalog? We have a 5.0 average on Google across 1,240+ reviews and an A+ BBB rating. Linked below.

Better Business Bureau
A+ BBB rated
Accredited business
★★★★★
5.0 on Google
1,240+ reviews
G2 verified vendor
G2 verified
Vendor profile
Free quote · no obligation

Get a quote on the Xerox 6622

Tell us how you want to pay (outright, lease, or supplies only) and what volume you run. You'll get a line-item quote back within one business day, from a specialist who actually works on these machines, not a general sales rep.

  • Real pricing, no runaround. Upfront monthly lease rate or outright price, plus shipping and any install add-ons itemized.
  • One business day turnaround. Quotes land in your inbox within 24 hours. Often faster.
  • No credit pull until you say yes. We don't ping your credit to give you a quote. Only if you sign.
  • Volume & bundled supplies. Tell us your monthly print volume and we'll price toner bundling so you don't get surprised.
FAQ

Xerox 6622, common questions

The questions we get asked most often on this model. If yours isn't here, call (888) 574-5120 and get an answer in about 30 seconds.

Yes, the Xerox 6622 ships with a starter toner cartridge. The starter toner yields approximately 58,000 square feet. The replacement toner model is 006R01445 (also listed as 6R1445), which is a high-yield cartridge designed for high-volume printing. When you lease through us with toner included, you never pay for toner separately.
The Xerox 6622 is a high-volume mono wide format MFP designed for reprographics shops and busy AEC firms, printing up to 22 D/A1 prints per minute at 600 x 1800 dpi. It includes 4 roll drawers and a 15-inch color touchscreen. In contrast, the Xerox 510 is a mono wide format CAD plotter suited for small AEC firms, printing up to 10 D/A1 prints per minute at 400 x 400 dpi and includes 3 roll drawers. The 6622 is better for high-volume, high-detail printing, while the 510 is more compact and suitable for mid-volume CAD printing. For small offices with lower volume needs, the Xerox 510 may be a more cost-effective choice.
The Xerox 6622 is designed for high-volume printing, with a recommended monthly volume of around 58,000 square feet (roughly 6,000 D-size plots) and a speed of 22 D/A1 prints per minute. Its large footprint and high-volume capabilities make it more suitable for reprographics shops or busy AEC firms rather than typical small businesses.
No, the Xerox 6622 is a monochrome-only printer. If you need color printing, consider alternatives such as the Xerox 6604, Xerox 6605, or other color-capable wide format printers.
Request a quote through the form on this page or call us at (888) 574-5120. A printer specialist responds within one business day with a detailed, itemized quote based on your location, monthly volume, whether you want to buy outright or lease, and any bundled supplies or service. Quotes are free and no obligation. We do not pull credit to issue a quote.
Xerox includes a 1-year limited manufacturer warranty on the Xerox 6622 when purchased new from an authorized reseller. 1-800 Office Solutions is an authorized Xerox reseller. Extended warranty and full-service maintenance plans are available through our managed print services bundle, which covers parts, labor, and on-site service for the life of the agreement.
Yes. Free delivery is included on every Xerox 6622 order shipped within the continental United States. Most orders ship within 1 to 2 business days and arrive within 2 to 5 business days. Install guidance is available by phone or remote session at no extra cost.

Ready to put this printer to work?

Request a free, no-obligation quote on the Xerox 6622. Lease, buy outright, or just order supplies. Quote in your inbox within one business day. Or call and talk to a specialist right now.

Get my free quote Or call (888) 574-5120